Since the arcade machine parts finally showed up, I have made the following modifications:

* Momentary pushbutton above marquee wired to the motherboard's power switch. When the computer is off this button turns it on; when the computer is on, this button sends the shutdown command.

* Momentary pushbutton above marquee that will eventually turn the monitor and marquee light on and off. I've contracted Bob to build me a small switched relay box that has two outlets on it and will be controlled by a 5V input signal. The box is nearly complete but not quite yet.

* HDD activity light in the corner of the bezel.

* Hole and grommet in the bottom rear panel for the power and network cables.

* Replaced bottom of control panel to be more rigid.

* Routed a cable through the bottom of the control panel to allow me to mount the audio controls to the bottom of the control panel on the player 1 side.

* Black plastic enclosure around light fixture and fabric covers for the inside of the speaker grills to block light leakage.

* Purchased 2 bar stools on Ebay

* Got a motion-capture application set up and moved the webcam over, but haven't yet put a hole in the bezel for it (so currently the image is of the back of the keyboard drawer).